Rolling Spec. Capacity Sheet

At Kubes Steel we have to capacity to roll and bend many kinds of steel to the following dimentions:

Shape & Section	Position	Size
Flat Bar	Easy Way Hardway	Up to 4" x 24" Up to 2" x 16"
Tee	Web In Web Out Web Up / Down	Up to a Section Depth of 18" Up to a Section Depth of 18" Up to a Section Depth of 18"
Beam	Easy Way Hard Way Swept Cambered	Up to a 40" Section Depth Up to a 40" Section Depth Up to a 40" Section Depth Up to a 40" Section Depth
Channel	Toe Out Toe In Hard Way	Up to a 18" Section Depth Up to a 18" Section Depth Up to a 18" Section Depth
Angle	Leg Out Leg In Short Leg In Long Leg In	Up to 8" x 8" x 1 1/4 " Up to 8" x 8" x 1 1/4 " Up to 8" x 8" x 1 1/4" Up to 8" x 8" x 1 1/4"
Angle (continued)	Short Leg Out Long Leg Out Angle Heel Out Angle Heel In	Up to 8" x 8" x 1 1/4 " Up to 8" x 8" x 1 1/4 " Up to 8" x 8" x 1 1/4" Up to 8" x 8" x 1 1/4"
Rectangular & Pipe	Rectangular HSS Easy Way Rectangular HSS Hard Way Pipe	Up to 20" x 12" Up to 20" x 12" Up to 40 " in diameter
Square	Square Square HSS Square HSS Diagonal	Up to 8" x 8" Up to 20" x 20" Up to 20" x 12"
Round	Round Round HSS	Up to 8" Diameter Up to 36" Diameter
Standard Rail	Standard Rail Standard Rail Standard Rail	Up to 135# / Yd Up to 135# / Yd Up to 135# / Yd
Plate		3/4" thick over 10 feet wide